This is cross cut saws pic

Wood Cross Cutting Saws System Technology With Maximum Yield Material

  • Cross-cutting (length cutting) is one of the first most important steps in solid wood processing. Manual cutting is a laborious job and carries a high risk of accidents.
    Both of these are avoided using modern cutting techniques.
  • Elasn Woodworking Machinery has experience from building thousands of automatic optimizing cross cut saw and so has unique skills, offering a wider range of products than any other manufacturer.
  • Irrespective of whether it is under table cross-cut saws, optimizing cut-off saws or optimizing cross cut systems.
  • The objective is always the maximum material yield for you.

Optimized cross-cutting with ELASN

  • Eliminate cutting defects
  • Sawing fixed lengths
  • Cutting packages to length
  • Optimizing board material
Optimizing Cross Cut Saw
Optimizing Cross Cut Saw
Optimizing Cross Cut Saw

If you are interested in starting a cross cutting saws system and technology, you can contact us now!

Technical Parameters Of cross cut saws system

Model ELA160
ELA280
Saw Motor Performance 4KW 7.5KW
Min. Cut Height 10mm 15mm
Max. Cut Height 50mm 100mm
Min. Cut Width 25mm 25mm
Max. Cut Width 230mm 230mm
Min. Incoming Length 350mm 350mm
Max. Incoming Length 6500mm 6500mm
Min. Nominal Cross-section 150*20mm 230*20mm
Max. Nominal Cross-section 120*50mm 160*60mm
Max. Cutting Tolerance up to 1.2m fixed length ±0.5mm ±0.5mm
Max. feed speed 150m/min 150m/min
Cutting cycle time(brake, cut, accelerate) ≤0.2s ≤0.2s
Electrial connected load 17KW 19KW
Air consumption 1000L/min 1000L/min
Operating pressure 6-8 bar 6-8 bar
Exhaust speed 30m/s 30m/s
Exhaust volume 2500m³ 2500m³

Additional Features:

  1. Maximize the efficiency of wood utilization;
  2. Ensure that the size and specifications of different orders to be processed are completed at the same time, and unified management;
  3. Change inventory specifications to inventory raw materials to reduce waste caused by secondary material preparation;
  4. Save a lot of manual sorting work;
  5. For multiple processing orders, materials can be optimized in advance,the yield rate can be estimated, material waste can be avoided, and the overall management level of the factory can be improved.

If you are interested in starting optimizing cross cut saw machine, please do not hesitate to contact us as soon as possible.

Cross Cut For Optimizing Mode

  • Optimal length
    Sawing according to the set list for maximum output rate.
    A. Without finger joint optimization.
  • B. With finger joint optimization
  • Grade preference
    Automatically reduce high-grade residual material to low-grade specification length to maximize value.
  • Value optimization
    According to the value coefficient of the set list, select the most valuable sawing plan.
  • Quantity (order) optimization
    Optimize according to the target number in the set list, so that the specification materials tend to be completed at the same time.
  • Defect sawing
    Only saw the defects in the wood.
  • Long material sawing
    Always saw the longest size material that can be sawed in the current list.
  • Material preparation
    Pre-reserve the required size range so that it can be used in the next order.
optimizing cross cutting saws

If you are interested in starting a cross cutting optimized system and technology machine, you can contact us at any time to learn more about cross cutting optimized system and technology machine Solution!

Our Mission

Elasn automated systems are designed to achieve the highest level of performance and safety. Each element of the production line is utilized for the continuous processing of raw materials and finished products, ensuring the desired level of productivity. Different elements and systems are available to meet the required level of automation, ensuring efficiency, safety, and reliability.

The Highest Level of Performance Is Our Objective

  • Design and construction specific to customer requirements
  • Low maintenance design and components
  • User-friendly control stations
  • Standard mechanical and electrical components with worldwide supply
  • Internet access for online maintenance is available
  • Highest levels of safety systems
cross cut plan drawings
cross cut plan drawings
cross cut plan drawings

If you are interested in starting a cross cutting optimized system and technology machine, you can contact us at any time to learn more about cross cutting optimized system and technology machine Solution!

FAQ

An optimizing cross cut saw automatically cuts wood to maximize material yield and reduce waste. ELASN optimizing cross cut saw systems use intelligent optimization software, high-speed positioning technology, and precision cutting controls to maximize lumber recovery, remove defects, and improve overall production efficiency for woodworking manufacturers.

It selects the best cutting pattern based on the available material and required lengths. ELASN optimizing cross cut saw solutions analyze each board, calculate the most profitable cutting sequence, and automatically generate cutting plans that help manufacturers achieve higher wood recovery rates and lower raw material costs.

A cross cut saw cuts across the grain, while a rip saw cuts along the grain. ELASN cross cut systems are designed for accurate length cutting, defect removal, and optimization, while rip saw machines are typically used for width processing and longitudinal cutting operations.

Yes, defect optimization is one of its key functions. ELASN optimizing cross cut systems can identify marked defects and automatically calculate cutting positions to remove knots, cracks, and other defects while maximizing usable lumber value.

Yes, it is commonly used for finger joint material preparation. ELASN optimizing cut-off saws help finger joint manufacturers produce defect-free wood blocks and fixed-length components that improve joint quality and production consistency.

They are widely used in furniture, flooring, finger joint, and lumber processing industries. ELASN cross cutting systems are commonly installed in furniture factories, solid wood flooring plants, finger joint board production lines, door and window manufacturers, and industrial lumber processing facilities.

Modern systems can achieve very high cutting accuracy. ELASN optimizing cross cut saw machines can achieve cutting tolerances as precise as ±0.5 mm, helping manufacturers maintain consistent product quality and reduce secondary processing requirements.

Automatic cutting improves efficiency, accuracy, and safety. ELASN automatic cross cut saw systems reduce labor dependency, increase throughput, improve workplace safety, and provide consistent cutting results that are difficult to achieve with manual operations.